セール
商品情報にスキップ
1
/
の
4
ハーレー スプリングフォーク用 フロントフェンダー 1934-1936 RL、1932-1936 Gに適合
ハーレー スプリングフォーク用 フロントフェンダー 1934-1936 RL、1932-1936 Gに適合
通常価格
$430.04
セール価格
$430.04
通常価格
$464.91
単価
/
あたり
配送料はチェックアウト時に計算されます。
低在庫:残り4個
配達予定日:
14 Oct
ご注文の商品は3~4営業日以内に発送いたします。
製造元/ブランド: ワイアット・ガトリング
SKU:50-0749
Harley Model / Year Fitment: RL 1934-1936, G 1932-1936,
レプリカスプリングフォークのフロントフェンダーは、一体型のスポット溶接スカートパネルと正確な幅のブレースが特徴です。フェンダーには、フォークロッカー部分の取り付けポイント用に両側に1つの穴があります。このフェンダーは、スプリングフォークの内側にロッカーがあるモデル用です。フェンダーランプの穴はありません。フェンダーの中央の幅は7-5/8インチです。塗装前にフェンダーを仮合わせすることをお勧めします。フェンダーには、細いブレースとロカースタッドポイントに位置する1穴タイプのマウントが含まれています。プライマーや塗装の前に、フェンダー本体、ブレース、取り付けポイントを所定の位置に取り付けてください。フェンダーのリベット、ヒンジ、ブラケットは、最終的な取り付けのために調整する必要があります。適切な取り付けには忍耐が必要です。適合するのはIビームタイプのフォークのみです。スプリングフォークに取り付ける上部の穴は、レストアラーがドリルで開ける必要があります。この配置には、スポット溶接されるスチール製の補強インサートが付属しています。フェンダーの上部取り付け穴は、塗装前に取り付け業者がドリルで開ける必要があります。ロカースタッドに取り付けるブラケット間のフェンダーの幅は10-5/8インチです。後部スタッドに取り付けます。フェンダーには幅5/8インチのブレースが付いています。適合ハーレー:1934-1936 RL、1932-1936 G、
Fender is for use on models with rockers on the inside of the spring forks. It does not have a fender lamp hole. The fender measures 7-5/8 inch wide at middle of fender. We suggest pre fitting the fender prior to painting. Fender includes narrow braces and a one hole type mount that is located at the rocker stud point. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hing and brackets will have to be tweeked for final fitment. Patience is a must for proper installation. Fitment is for I-beam type forks only. Top holes which mount to Spring Fork must be drilled by restorer. Steel reinforcement insert is supplied to be spot welded in this placement. The top mount holes in fender must be drilled by installer before painting. The fender is 10-5/8 inch between the brackets that mount to the rocker studs. Mounts to rear studs. Fender features braces that are 5/8 inch wide.
製造部品番号:
技術情報: フロントフェンダーインナーブレース #50-0734との併用を推奨します。
寸法: 幅:7-1/4インチ
OEM交換部品番号:
生産地: 台湾
Available Replacement Components / Related Part #s : 50-0643 , 31-1355 , 31-1342 , 13-1935
NOTE: 部品取り付け手順は、以下にリンクが表示されている場合を除き提供されていません。
